Altai WIF-AL-00075 C1n 2.4Ghz WiFi Access Point

Regular Price: $302.94

Special Price $297.00

Availability: Out of Stock

Altai WIF-AL-00075 C1n 2.4Ghz WiFi Access Point | Per Client/VAP Based Bandwidth Control | ±45° Dual Slant Patch Antennas | IP55 Standard Weatherproof Chassis | 8-level LED | High Performance Antenna With 20 dB Front-To-Back Ratio | Remote Web-Based Management | Super Long Range Coverage | Maximum Data Rate 300 Mbps
Product Description

Product Description

C1n Super WiFi CPE/AP

Complementing Altai’s super WiFi base station coverage solution are the C1n high-performance CPEs, which employ a patented smart-signal processing algorithm and an antenna designed to increase WiFi signal strength (transmission and reception) as well as the client’s throughput. It can also operate as a standalone access point to provide line-of-sight coverage of up to 250m.

Highlights:
• Patented signal processing for improved radio performance in LOS and NLOS conditions
• Supports multiple isolated end-users through per client/VAP bandwidth control
• Per-end-user remote web-based management and client association status
• High-performance antennas with ±45°cross-polarized patch antennas – optimizing performance when operating in conjunction with Altai A8n series antennas
• Operates both as a CPE and as a small WiFi access point for local coverage
• Integrated 8-level LED alignment mechanism for fast, simple and best performing installation
• Weatherproof case (IP55 compliant) for enabling out-of-the-box outdoor installation
• The C1n operates in the 2.4Ghz band while the C1an operates in the 5Ghz band
Fi channel

Altai C1n Super WiFi CPE/AP
The Altai C1n WiFi CPE/AP is designed as an essential component in the Altai Super WiFi system to extend outdoor Wi-Fi coverage into indoor areas for broadband connectivity or use as an AP for pico coverage.

The Altai C1n employs patented smart signal processing algorithms and antenna design to increase Wi-Fi signal strength (transmit and receive) by as much as 16 dB in areas covered by an A8n Super WiFi Base Station or A2 WiFi Access Point. It can be installed exactly where the throughput is required to boost up, and it allows the service operator to increase the coverage range of an A8n base station substantially and provides greater flexibility and cost savings to Wi-Fi deployments.

Super Long Range Coverage
Max. LOS Access 800 m
Max. LOS CPE 4 km to A8-Ein(ac)
3 km to A3-Ei
Max. Data Rate 300 Mbps

Control Traffic Throughput Flexibly
From day one, the C1n is designed and purposebuilt for service operators. Its built-in traffic shaping based bandwidth control mechanism allows the control of uplink and downlink traffic throughput on a per-client or per-VAP basis. A full set of networking and management features are available to meet carriers’ requirements. 

Altai C1n for Wireless Broadband
The C1n is a key component in wireless broadband access provisioning. It can be installed outdoor by the side of a window, mounted to a wall, at the rooftop of a building or placed at the desktop inside for fixed broadband access provisioning.

Specifications

Additional Information

Product SKU ATI00001
Model WIF-AL-00075
Condition New
WiFi Frequency Band 2.4GHz
Advanced Features

Wireless Interface
802.11b/g/n (2x2) Radio
• Operating Mode AP/ CPE/Repeater
• Standard IEEE 802.11b/g/n
• Operating Frequency 2.400 – 2.485 GHz (Ch 1-13)
• Transmit Power 29 dBm (Max.)
26 dBm (Per Chain)
• Receiver Sensitivity (Typical)
802.11b 11 Mbps -91 dBm
1 Mbps -96 dBm
802.11g 54 Mbps -81 dBm
6 Mbps -95 dBm
802.11n HT20 -95 dBm
HT40 -92 dBm
• 16SSID
• WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w
• Passpoint (Release 2)
• Fast Roaming
• Auto Channel Selection and TX Power Control
• Bandwidth Control Per SSID/Client
• Altai AirFi™ Throughput Optimization
Antennas
 Built-in 2.4 GHz Antenna 10 dBi Dual Slant ±45°Sector
 Horizontal Beamwidth 70°(-3 dB)
 Vertical Beamwidth 30°(-3 dB)
 Front-to-back Ratio -20 dB (Max.)
Networking
• Switch (Bridge) and Gateway Mode
• IPv4/IPv6 Dual-Stack
• NAT
• DHCP Client/Server
• PPPoE Client
• Soft-GRE
• VLAN
• Multicast Rate Filter/IGMP Snooping
Security
• Authentication – Open, Shared key, WPA/WPA-PSK, WPA2/
WPA2-PSK, WPA3*, 802.1x (EAP-PEAP/TLS/TTLS/SIM/AKA)
• Encryption – WEP, TKIP, AES
• Inter/Intra-SSID Client Isolation
• MAC-based Access Control (White/Black List)
• RADIUS/Active directory
• Dynamic VLAN Assignment
• Firewall
• WIDS/WIPS
• Broadcast/Multicast/Unicast Flooding Control
Management
• Management Platforms: AltaiGate, AltaiCare, AtlaiCare
Appliance
• Web User Interface
• Command Line Interface (SSH)
• Remote Factory Reset
• Trusted Management IP List
• SNMP v1/v2c/v3
• MIB2/IF-MIB/Altai Enterprise MIB
• Syslog
• Spectral Analysis*
• KPI Monitoring*
• Client OS and Hostname Detection

Physical Specifications
• Dimension 242 x 80 x 27 mm
(Without Mounting Kit)
• Weight 0.4 kg
• Mounting Desktop, Pole, Wall or
Window-Mounted
• Network Interface 10/100 Mbps Ethernet Port
• LED Display Main Power Status
Ethernet Status
8-Level Signal Strength
(User Configurable)
Power Supply
• Power Supply 18V Passive PoE PD or 802.3af
PoE PD via Adapter
• Power Consumption 6 W (Typical)/8 W (Max.)
Environmental Specifications
• Operating Temperature -20 °C to +55 °C
• Storage Temperature -40 °C to +80 °C
• Humidity Up to 95% (Non-Condensing)
• Wind Loading Up to 200 km/h (124 mph)
• Weatherproof Outdoor UV Stabilized Plastic
IP55 Compliant

Certifications
• FCC/CE/Others*
• RoHS Compliance

Product Ordering Information
C1n (Part No.: SD.C1-N000-UK/US/EU)
Standard Package
C1n Super WiFi CPE/AP with Built-in 2.4 GHz Patch Antennas
(Model No.: WA1011N-G)
DC Injector and AC Adapter (UK, US, or EU)
Cable Ties
Optional Accessories
802.3af to Passive PoE Adapter

Warranty 2 Year Warranty