IPv4 and IPv6 Static routing
USB support for update of firmware/configuration
Auto-update of firmware and configuration, from TFTP server/USB
Authentication via TACACS+ server
Dynamic ARP Inspection
Unidirectional Link Detection (UDLD)
Multiple Spanning Tree (MSTP)
LLDP and LLDP-MED
Port Profile (built-in scripts)
Dimensions (H x W x D):
1.71 in x 17.1 in x 10.63 in
(43.5 mm x 434.0 mm x 270.0 mm)
Rack mount: 1RU
Unit weight: 3.80 Kg
Fans: 2 (rear)
DHCP client support allows for simplified IP address assignment when used with a DHCP server.
Switch software can be easily uploaded to the switch through the web-management interface.
Configurations can be easily uploaded to and from the switch through the intuitive web-management interface.
Port statistics available through industry-standard RMON. Switch is factory-configured as an unmanaged switch, but can be easily configured as a web-managed switch with the push of a button.
Jumbo frame support for packets up to 9,000 bytes. Broadcast storm control to help eliminate network traffic storm.
Industry-standard link aggregation adhering to IEEE 802.3ad standards (static and dynamic, LACP)
Supports 12 link aggregation groups and up to 4 ports per group
Local password and restricted IP addresses for secure access to the switch Port mirroring provides the capability of mirroring 8 source ports and VLAN mirroring to improve network traffic monitoring and troubleshooting.
MAC addresses: 16K
Packet buffer memory: 1 Mb
Switch fabric capacity: Up to 176 Gbps
Forwarding rate: 131 Mpps
Supports Virtual Cable Diagnostics by Marvell™ and fiber transceiver diagnostics to provide advanced troubleshooting capabilities for your cable infrastructure Integrated LEDs for improved visual monitoring and analysis.
10/100/1000Base-T auto-sensing Gigabit Ethernet switching ports: 48
SFP/SFP + fiber ports: 4 SFP/SFP +
Power over Ethernet (PoE) ports: not available
PoE powered: not available
Power reduction for short cables or inactive connections: standard
Autonegotiation for speed, duplex mode and flow control: standard
Auto-MDI/MDIX mode and flow control: standard
Power supply: 100W
Power (max): 60.2W
Power BTU/hr: 205.2
Priority queues per port: 8
Supports up to 4096 port-based VLANs. Honors all 4096 VLAN tags.