Kingston 8GB Value Ram 2666MHz DDR4 Non-ECC CL19 SODIMM KVR26S19S8/8

$73.00

Availability: In stock at supplier

Kingston 8GB Value Ram 2666MHz DDR4 Non-ECC CL19 SODIMM KVR26S19S8/8 | 1.2V | 19-19-19 | DDR4-2666 | 260-pin DIMM | Limited Lifetime Warranty
Product Description

Product Description

KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM utilize gold contact fingers. 

Specifications

Additional Information

Product SKU KIN00088
Model KVR26S19S8/8
Condition New
Features

CL(IDD) - 19 cycles
Row Cycle Time (tRCmin) - 45.75ns(min.)
Refresh to Active/Refresh - 350ns(min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) - 32ns(min.)
Maximum Operating Power - TBD W*
UL Rating - 94 V - 0
Operating Temperature - 0oC to +85oC
Storage Temperature - -55oC to +100oC

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free

Warranty Limited Lifetime Warranty