Rode Wireless PRO
Compact Wireless Microphone System
- 32-Bit Float On-Board Recording
- Advanced Timecode Sync
- Intelligent GainAssist Technology
- Up to 260m Transmission Range
State-of-the-art Wireless Audio
RODE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Using state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.
Never Lose a Recording
There’s nothing worse than pulling your audio into your editing software and realising your recording clipped and can not be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.
Audio and Video, Perfectly in Sync
With the Wireless PRO’s advanced timecode capability, you can perfectly synchronise your audio and video with ease – no need for complex and expensive external timecode systems.
Pristine Audio in Any Situation
In addition to its 32-bit float on-board recording, the Wireless PRO provides a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.
The Ultimate Pro Recording Kit
The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are ideal for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips.
Connect to All Your Devices
Thanks to its analog (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers.
Easy Configuration and Control
Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere utilizing your computer or smartphone with the RODE Central app. Complete control over your setup, so you can be ready for any recording situation.
Monitor and Record
Monitor your audio in the field with the Wireless PRO’s high-power headphone output, complete with on-board level control, or link a headset to capture a third audio track while you’re monitoring. Ultimate versatility.
Compact and Highly Portable
The Wireless PRO features the same super compact, ultra-lightweight design that the Wireless GO series is renowned for. Discreet on talent and highly portable, this is the ideal addition to any recording setup.
Road Ready
The included smart charge case not only protects the Wireless PRO while you are on the road, but ensures it’s always charged and ready to go. It also allows for ultra-fast data transfer, so you can quickly export recordings on the move.
Locked and Loaded
Locking 3.5mm lavalier connectors mean you never have to worry about your mics being pulled out mid-shoot. Perfectly paired with the included Lavalier II premium lavalier microphones.
Specifications
Acoustic and Electrical (Wireless PRO)
Acoustic Principle
Pre-polarised pressure transducer
Polar Pattern
Omnidirectional
Frequency Range
20 Hz – 20 kHz
Maximum SPL
123.5 dB SPL
Equivalent Noise (A-Weighted)
22 dBA
Signal-to-noise Ratio
72 dB
Analog Inputs
3.5mm locking TRS (TX)
Analog Outputs
3.5mm TRRS (RX)
Transmission Range
260m (line of sight)
Digital Connectivity
USB-C
Operating System Requirements
macOS 10.15 above
Windows 10 and above
iOS 14 and above
Android 11 and above
Power Requirements
In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time
Up to 7 hours
Acoustic and Electrical (Charge Case)
Battery Capacity: 4200 mAH
Power Requirements: 5V/3A via USB-C
Charging Time: 2.5 hours
Charge Current: 2A (maximum)
Total charges (TXs and RX): 2 complete charges
Connection Type: USB-C (SuperSpeed USB-C cable required
for optimal data transfer speeds)
Mechanical
Weight (grams):
TX: 35
RX: 36
Charge case: 177
Total: 284
Dimensions (millimetres):
TX: 46.5 (W) x 44 (L) x 20 (H)
RX: 46.5 (W) x 44 (L) x 20 (H)
Charge case: 101 (W) x 82 (L) x 70 (D)
Compatible RODE Accessories:
Lavalier GO
RODELink Lav
HS2
Lavalier II
DCS-1
Interview GO
MagClip GO
FlexClip GO
SC2
SC4
SC7
SC11
SC15
SC16
SC17
SC18
SC19
SC21
SC22
Compatible RODE Software:
RODE Central
RODE Connect
UNIFY
RODE Central Mobile
RODE Reporter
RODE Capture
What's in the Box
2 x TX
1 x RX
1 x Charge Case PRO
1 x SC2
1 × SC21 USB-C to Lightning cable
1 x SC22 USB-C to C cable
1 x USB-C to C superspeed cable
2 x MagClip
3 x Furry
2 x Lavalier II
2 x Pop Filter (Lav)
2 x Mic Clip (Lav)
2 x Mini Furry (Lav)
1 x Accessory Case
1 x Lens Cloth
