Advanced Features | MOBILE Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned) Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply, scheduled SMS (planned), SMPP (planned) Black/White list Operator black/white list Multiple PDN (planed) Possibility to use different PDNs for multiple network access and services Band management Band lock, Used band status display APN Auto APN Bridge mode Direct connection (bridge) between mobile ISP and device on LAN
WIRELESS Wireless mode 802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) WiFi security WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation ESSID ESSID stealth mode Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET WAN 1x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover LAN 3x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
BLUETOOTH Bluetooth 4.0 Bluetooth low energy (LE) for short range communication
NETWORK Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW) Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL) VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall Port forwards, traffic rules, custom rules DHCP Static and dynamic IP allocation, DHCP Relay, Relayd QoS Traffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11e DDNS Supported >25 service providers, others can be configured manually Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover Load balancing Balance Internet traffic over multiple WAN connections SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY Authetication Pre-shared key, digital certificates, X.509 certificates Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) VLAN Port based and tag based VLAN separation Mobile quota control Custom data limits for both SIM cards WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) GRE GRE tunnel PPTP, L2TP Client/Server instances can run simultaneously Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code DMVPN Method of building scalable IPsec VPNs SSTP SSTP client instance support
MODBUS Modbus TCP slave ID range 1-255 Modbus TCP master Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
MONITORING & MANAGEMENT WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log FOTA Firmware update from server, automatic notification SSH SSH (v1, v2) SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem SNMP SNMP (v1, v2, v3), SNMP trap JSON-RPC (planned) Management API over HTTP/HTTPS MQTT MQTT Broker, MQTT publisher RMS Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS CPU Quad-core ARM Cortex A7, 717 MHz RAM 256 MB, DDR3 FLASH memory 256 MB SPI Flash
FIRMWARE / CONFIGURATION WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup FOTA Update FW/configuration from server RMS Update FW/configuration for multiple devices at once Keep settings Update FW without losing current configuration
FIRMWARE CUSTOMIZATION Operating system RutOS (OpenWrt based Linux OS) Supported languages Busybox shell, Lua, C, C++ Development tools SDK package with build environment provided
LOCATION TRACKING GNSS GPS, GLONASS, BeiDou, Galileo and QZSS Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS NMEA NMEA 0183 Server software Supported server software: TAVL, RMS Mobile Network Geolocation Get approximate device location on RMS based on mobile cell tower position (without using GPS) Geofencing Configurable multiple geofence zones
USB Data rate USB 2.0 Applications Samba share, custom scripts (planned) External devices Possibility to connect external HDD, flash drive, additional modem, printer (planned) Storage formats FAT, FAT32, NTFS
INPUT/OUTPUT Input 1x Digital Input Output 1x Digital Output Events SMS, Email, RMS
POWER Connector 4 pin industrial DC power socket Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards Power consumption 11 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) Ethernet 4x RJ45 ports, 10/100/1000 Mbps I/Os 1 Digital Input, 1 Digital Output on 4 pin power connector Status LEDs 3x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 4x WAN status LEDs, 1x Power LED, 2.4G and 5G WiFi LEDs SIM 2x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders Power 4 pin DC connector Antennas 2x SMA for LTE, 2x RP-SMA for WiFi, 1x RP-SMA for Bluetooth, 1x SMA for GNNS USB USB A port for external devices Reset Factory reset button
PHYSICAL SPECIFICATION Casing material Full aluminium housing Dimensions 115 mm x 95 mm x 44 mm (H x W x D) Weight 456 g Mounting options DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT Operating temperature -40 C to 75 C Operating humidity 10 % to 90 % non-condensing Ingress Protection Rating IP30
REGULATORY & TYPE APPROVALS Regulatory & Type Approvals CE/RED, RoHS, REACH Vehicle ECE R10 (E-mark)
EMI IMMUNITY Standards EN 55032:2015, EN 55035:2017, Draft ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, Draft ETSI EN 301 489-17 V3.2.0 ESD EN 61000-4-2:2009 RS EN 61000-4-3:2006+A1:2008+A2:2010 EFT EN 61000-4-4:2012 Surge protection EN 61000-4-5:2014 CS EN 61000-4-6:2014 DIP EN 61000-4-11:2004
RF Standards ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1
SAFETY Standards IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2 |