Cambium Networks 1000Base-T (RJ45) SFP Transceiver - 40C to 85C [SFP-1G-Copper]

Specification

+3.3V Electrical Power Interface

Supply Current (Is): 320 - 375 mA
Input Voltage (Vcc): 3.13 - 3.3 - 3.47 V (Referenced to GND)
Maximum Voltage (Vmax): 3.6 V

Low-Speed Signals, Electronic Characteristics

SFP Output LOW (VOL): 0 - 0.5 V (4.7k to 10k pull-up to host_Vcc, measured at the host side of the connector)
SFP Output HIGH (VOH): host_Vcc - 0.5 - host_Vcc + 0.3 V (4.7k to 10k pull-up to host_Vcc, measured at the host side of the connector)
SFP Input LOW (VIL): 0 - 0.8 V (4.7k to 10k pull-up to Vcc, measured at the SFP side of the connector)
SFP Input HIGH (VIH): 2 - Vcc + 0.3 V (4.7k to 10k pull-up to Vcc, measured at the SFP side of the connector)

High-Speed Electrical Interface Transmission Line-SFP

Line Frequency (fL): 125 MHz (5-level encoding, per IEEE 802.3)
Tx Output Impedance (Zout,TX): 100 Ohm Differential, for all frequencies between 1MHz and 125MHz
Rx Input Impedance (Zin,RX): 100 Ohm Differential, for all frequencies between 1MHz and 125MHz

High-Speed Electrical Interface, Host-SFP

Single-ended data input swing (Vinsing): 250 - 1200 mV (Single-ended)
Single-ended data output swing (Voutsing): 350 - 800 mV (Single-ended)
Rise/Fall Time (Tr,Tf): 175 psec (20%-80%)
Tx Input Impedance (Zin): 50 Ohm (Single-ended)
Rx Output Impedance (Zout): 50 Ohm (Single-ended)

General

Data Rate (BR): 10 - 1000 Mb/sec (IEEE 802.3 compatible. See Notes 2 through 4 below)
Cable Length (L): 100 m (Category 5 UTP. BER <10^-12)

Operating and Storage Temperatures

Operating Case Temperature (Tc): -40 to +85 °C
Storage Temperature: -40 to +85 °C