Grandstream HT801 1 Port FXS Analog Telephone Adapter (ATA) [HT801]

Security
Media SRTP
Control TLS/SIPS/HTTPS
Management Syslog support, SSH, remote management using web browser

TECHNICAL SPECS

Interfaces
Telephone Interfaces 
One (1) FXS port

Network Interfaces 
One (1) 10/100Mbps auto-sensing ethernet port (RJ45)

LED Indicators 
POWER, INTERNET, PHONE

Factory Reset Button 
Yes

Voice, Fax, Modem

Telephony Features 
Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference

Voice Codecs 
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.722, G.723.1, G.729A/B, G.726,
iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation

Fax Over IP 
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax

Pass-through

Short/Long Haul Ring Load 
5 REN: Up to 1km on 24 AWG

Caller ID 
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID

Disconnect Methods 
Busy Tone, Polarity Reversal/Wink, Loop Current

Signaling
Network Protocols 
TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, SSH,
STUN, SIP (RFC3261), SIP over TCP/TLS, SRTP, TR-069

QoS 
Layer 2 (802.1Q VLAN, SIP/RTP 802.1p) and Layer 3 (ToS, DiffServ, MPLS)

DTMF Method 
In-audio, RFC2833 and/or SIP INFO

Provisioning and Control 
HTTP, HTTPS, SSH, TFTP, TR-069, secure and automated provisioning using AES
encryption, syslog

Security
Media SRTP
Control TLS/SIPS/HTTPS
Management Syslog support, SSH, remote management using web browser

Physical
Universal Power Supply Input: 100-240VAC, 50-60Hz
Output: 5.0VDC/1.0A

Environmental
Operational: 32º – 104ºF or 0º – 40ºC
Storage: 14º – 140ºF or -10º – 60ºC
Humidity: 10 – 90% Non-condensing

Dimension and Weight 
Dimensions: 100mm x 100mm x 29.5mm
Weight: 102 g

Compliance
FCC: Part15B
CE: EN55032, EN55024, EN61000-3-2, EN61000-3-3, EN60950-1
RCM: AS/NZS CISPR22, AS/NZS60950.1, S003
K.21