IP-COM F1110P-8-102W 8-Port 10/100Mbps+2 Gigabit Desktop Switch With 8-Port PoE

Specifications

Network standards    
IEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at

MTBF    
 50,000 hours(about 5 years)

LED indicators    
Link/Act, PoE Status, Power, 1000M

Fixed ports    
8 x 10/100Base-TX RJ45 Ports(Data/Power)
2 x 10/100/1000Base-T RJ45 Port(Data)

Port lightning protection    
≥6 kV

Forwarding mode    
Store-and-forward

Switching capacity    
5.6 Gbit/s

MAC address table    
4K MAC

PoE power supply    
Port 1 to Port 8 support standard IEEE802.3at/af power( maximum power for each port is 30W) 
PoE power type is end-span(1245+, 3678- line pair)

in full configuration <102W
PoE Max Power Supply 99W

Dimensions ( W x D x H )    
177.5mm*104mm*26mm

Input Voltage    
AC 100－240V～ 50/60Hz

DC 51V /2.1A  
Power Adapter  

Environment    
Operating Temperature: 0℃~40℃ (32℉~104℉)

Storage Temperature:
 -40℃~70℃ (-40℉~158℉)

Operating Humidity: 
10%~90% non-condensing

Storage Humidity: 
5%~90% non-condensing

One-key Mode    
Default Mode: If Default mode is enabled, the device works as a general switch and all ports support 10/100Mbps auto-negotiation. VLAN Mode: 1-8 port can be isolated each other but 1-8 port can connect to 9/10 port after open VLAN to stop broadcast storm to increase forwarding rate of frame.
Extend Mode: If Extend mode is enabled, VLAN isolation is enabled. Port 1-4 will be isolated respectively (10Mbps auto-negotiation), but can communicate with the Uplink port. And the delivery distance of powering and network data is up to 250m (10Mbps).

Certification    
3C, FCC, CE, RHOS