IP-COM F1126P-24-250W 24-Port 100M 1-Port Gigabit PoE Switch with SFP

Hardware specifications

Standards    
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at

LED indicators    
24 * Link/Act LEDs
1 * G1 LED
1 * G2/SFP2 LED
1 * PoE-MAX LED
1 * Power LED

Lightning protection    
Port: 6kV
Power: 6kV

Forwarding mode    Store-and-forward

Switching capability    8.8 Gbps

Packet forwarding rate    6.55 Mpps

Buffer    4 Mb

MAC address table    
16K

PoE supply    
Ports 1-24 support standard IEEE802.3af/at
30W output per PoE port
230W output of the total PoE Power

Power consumption    
250W output the whole device

Input voltage    
AC：100-240V～ 50/60Hz

Dimensions    
440 mm x 178.8 mm x 44 mm(L*W*H)

Four Modes    

"Standard: Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately.
Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately.
Extend: In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other.
VLAN: In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast."

Operating environment    

Operating temperature: 0°C - 45℃
Storage temperature: -40°C - 70°C
Operating humidity: (10% - 90%)RH, non-condensing
Storage humidity: (5% - 90%)RH, non-condensing

Certificates    
CCC、FCC、CE、RoHS