It's Surprisingly Easy!
At this time, Ubiquiti has always been associated with top-rated networking gear and, in many people's opinions within the industry, the industry leaders.
Their catalogue comprises access points, routers, and switches, offering efficient and strong networking options for different business and personal users. Everyone understands that they have a lot of options here these days.
Access Points
Access points from Ubiquiti are preferred because they provide easy wireless connections in different environments. These have been created to provide continuous and fast services; hence, they are suitable for small houses and big companies alike.
Ubiquiti access points are highly unique because of the many useful extra options and guest access.
The features enable users to make several wireless networks, adjust guest entry, and control the network remotely, leading to the popularity of these access points.
Setting Up
This article highlights what you need so as to configure and install your Ubiquiti access point for the best operation. With this point of view, you might as well be using Ubiquiti at home.
That is why we will focus mainly on vital aspects like placing in the right positions, updating appropriate firmware versions, configuring correctly to networks and adjusting correct security needs.
Whatever networking requirements you have, Ubiquiti will have you on the front foot. Even if you are not familiar with them, don’t look for an alternative just yet; let’s keep going.
Getting Started
Initially, your Ubiquiti access point should be linked to the network with an Ethernet wire.
Then, connect the access point to an electrical power supply. The device will begin to power on, and the LEDs should flash briefly.
Connecting to this access point with your computer or smartphone is possible once it finishes powering on. Therefore, you have to get your SSID and password for this access point, which could either be available on the gadget itself or within its respective documentation.
Configuration
Use your computer or a mobile device to connect to the wireless network of an access point. When connected, open any web browser and enter the access point’s IP address (it is also mentioned in the documents).
You will be requested to provide your username and login details by default.
Upon keying in your credential, you log into the access points management interface.
You can set up the access point’s settings from here for various purposes. You can support several SSIDs, create a guest network, and use online administration, among other capabilities.
Access the “Wireless Networks” sector under the management panel, then press the “Add New” button to establish several SSIDs. After that, you will be prompted to provide a name for the generated network and select appropriate protection measures before configuring any additional settings.
Go to “Guest Control” under “Management Interface” and configure guest access. This option allows you to create a guest network and configure a captain portal that guests will have to log into.
Follow the instructions on the management interface in the “Cloud Access” section to set up your account and configure your access point to the cloud.
That's about it! We know it should be more complicated. It’s NOT.
You should be able to set up and configure your Ubiquiti access point for tip-top performance. If you have any issues or questions, you’ll have their customer support, which is 24/7.
Ubiquiti’s Access Points
Such access points are yours to use …
UniFi 6 Long-Range (U6-LR)
A high-performance WiFi 6 Access Point with a long-range signal. It supports:
Dual-band AC3000 WLAN with two WiFi 6 streams on 2 GHz and four WiFi 4 streams on 5 GHz for a total throughput of 3 Gbps.
It uses a 36* down tilted antenna pattern for wide area coverage and support of up to 350+ clients.
The UAP-AC-PROs are being powered by PoE+ and managed in UniFi Network via apUniFi AC Pro (UAP-AC-PROs).
UniFi 6 Plus (U6-Plus)
It’s an indoor compact WiFI–6 Access Point with state-of-the-art functionalities. It supports:
The wireless connection utilises 5 GHz 2.4 GHz WiFi 6 (4 x 4 MIMO) and 2.4 GHz (2×2 MIMO), which provides a 2.4 Gbps data rate.
This antenna is balanced for better performance and accommodates up to 300 + devices.
It uses PoE+ and is controlled through the UniFi Network app.
UniFi AC Pro (UAP-AC-PRO).
This is one of the world’s finest indoor/outdoor WiFi 5 wireless access points, having dual band features. It supports:
The 3×3 MIMO 2.4GHz WiFi 5 band and 3×3 MIMO 5GHz WiFi 5 band offer a maximum speed of 1.3Gbps is Nighthawk AC2600.
A balanced antenna pattern provides versatile mounting options and supports over 200+ connected devices.
It comes with two GbE RJ45 ports, one for PoEin and another for extended device connection.
The UniFi network application manages it.
SUMMARY
Ubiquiti has taken the lead in the network industry and overtaken its competitors. We always watch out for their systems because they stretch market limits. Whenever Ubiquiti hops into the scene, the market asks, “How high?” They just keep providing solutions, and there’s nothing more anybody would want to have at home or in the workplace!